Skip to content

We find gears in every industries, such as cement, mining or food processing and the conditions of use vary greatly depending on the sector. According on load, vibration and shock levels, the anti-wear and extreme-pressure properties determine the choice of lubricant. The operating temperature in service oil from very low to moderate between +20 °C and +80 °C, can also reach high temperatures over 80 °C and extreme exceeding 120 °C. The lubricant impact on the gears environment in the event of leakage needs biodegradability properties, suitability for incidental food contact or non-staining must be consider. The conditions of maintenance with synthetic fluid offering a long oil drain interval and guaranteeing proper operating safety makes significant savings in maintenance costs.

Our gear oils

TotalEnergies gear oils CARTER, KASSILLA and TotalEnergies NEVASTANE are designed for different type of gear dimensions, metallurgy of the toothing, sliding characteristics and speed reducing ratio, open or closed casing.

Our versatile range of oils for gears: CARTER

TotalEnergies CARTER range offer a large gearboxes lubrication possibilities based on high performance antiwear, extreme pressure and antiscuffing perormances required and approved by the majors OEMs… The formulation of CARTER range based of mineral to full synthetic base oil products covers all lubrication need required by gearbox manufacturers.

Our lubricants for gears in a harsh environment: KASSILLA

TotalEnergies KASSILLA range is suitable for gearboxes lubrication where shocks and vibrations could damage the equipment thanks to specific additives which prevent failures and resulting breakage.

Our lubricants for gears in food processing industry: NEVASTANE EP, XSH

TotalEnergies Lubricants has developed a wide range of oils with strong properties to resists extreme pressure environment for the lubrication of all your spur gears, helical gears, spiral bevel gears, worm gears, and pinions, wherever there is a risk of contact with food or not. We offer a very competitive mineral formulas. For gears operating in severe conditions, we also offer synthetic formulas based on carefully selected PAO or PAG able to bring extra properties such as limited oxidation. By reducing the friction coefficient in your equipment, these synthetic lubricants will decrease your energy consumption while extending the wear and your equipment shelf life.

Other applications

Our services

TotalEnergies Lubricants offers a wide range of services for industry professionals. From in use oil analysis to our TIG6 maintenance software (CMMS), our range of services is specifically designed to help you approach the management of your operations with confidence, allowing you to focus on what matters most: your production.